|
+1 for javadog
2 things...you need to drill new holes in your old bumper and fill the old ones
then the valance will interfere - options are:
remove lower valance and run without it
get an SC valance - drill new mounting holes for new location about 1/2 in further under the car, get it painted to match
trim the bottom off the bumperettes
bail on the project and have 2 new holes on one side of you bumper where your failed attempt will forever be reminding you that you should have asked more questions up front
that last one was my option - (the big bumperette cover the new holes....nothing visual shows)
__________________
Ed M
86' Coupe
|