|
Believe it or not its a piece of cake, look behind dash and you will probably find that the two wire bundles are held together with a plastic wire tie(usually white) CAREFULLY cut that away (I used X acto knife) and you will be able to pull the connectors through and reinstall
Th=e hard part is cutting the plastic tie
Also you should remember that if you didnt disconnect battery and turn ignition on you will cause airbag fault and light wont go out without hammer/scantool/durametric
Should always disconnect battery and wait 20 minutes before swimming (ummm working on airbag system)
Last edited by 964TargaC2; 12-03-2012 at 03:40 PM..
|