|
off the top of my head:
* for the record, I have an '87 944 na
* yes I agree the rectangular holes in the spoiler on the hatch must be clear. one on either side (LR). had big trouble with this. using a thin line ("weedwacker" in my case) helped (2mm). had to pull in and out to clear the hold all the time (parked under trees). water etc. collected at an angle. annoying, but managable.
* if water in spoiler when lifting hatch: water runs back along the edge and randomly messily drips over the side of the hatch. when open, the edge is not aligned perfectly with the car body, so water can drip/spill inside. I think I opened the hatch slightly to let water drain mostly, then slowly raised it all the way.
* thinking more about it, I think the tubing that attaches to the hatch pin clasps runs down behind and under the carpet in the hatch, so you need to pry it way up like you are getting the spare tire.
HTH!
|