[johncsmotors]

Hey guys I made up a couple styles of tie down brackets that we use on all of our cars.

There are two styles. One bent at a 45 degree angle and one bent at a 66 degree angle. These are very similar to the rennline brackets that sell for 40$ a set. But these are made of 1/4 instead of 3/16 (we actually had a couple oval out on the bolt holes allowing the bolt to come lose).

They have a 1/2" hole so that the 12mm bolts fit through them perfectly. We have also been installing these on the front control arm mount (where it bolts to the crossmember with a washer) and on the back side of the torsion bar tube mount where it connects to the body. These have been very secure and great spots to tie the car down.

No more axel straps sliding around!]

These are powder coated red (pictured is painted).

I would like $35 shipped to usa for a pair of these, please specify if you would like the small or larger angle.