[zotman72]

You have a T motor, with T components. What will S cams do for you? Nothing as far I know (which is not much) without making other critical S mods, such as porting the heads, bumping the compression (currently 7.5:1). Going with JE pistons or S ones if you can find some. Make sure you check your ring land gap on the top rings. You might have exceeded your wear limit. Oh is your wrench in town (Denver metro?), has he done this S cam mod on T motors before, what sort of hp increase is claiming will result? I personally would not do it unless there is promised (dyno verfied) results offered.
HTH