|
Ok so far this is what i have tried.
I have got the starter motor to turn by putting 12v directly to it underneath the car, when i did this i also tried starting the car by turning the key but to no success.
I tried the same thing but hot-wired the fuel pump and it started to pump but the car didnt start.
I tried the above stuff with the alarm as it was from the beginning and also when I had put jumpers on it.
I disconnected the kabel beside the brake fluid container and tried to put 12 volt on the red cable to see if the starter would turn but it didnt. Could be that I didnt get enough connection tough.
So the alarm seems to still be activated but I cant figure out how to disable it.
Any ideas anyone?
|