|
Registered
Join Date: Jul 2004
Location: Upstate New York
Posts: 3,280
|
The factory alarm circuit does not affect the starter circuit. You have mentioned that you have an aftermarket alarm. The aftermarket alarm may have cutout the starter circuit.
There is no "main fuse" as such for your car, or for any 944 at all.
If you have been able to get the car running by using the DME relay bypass jumper, and using a separate 12 volt wire to get the starter to turn, you have proven that the DME (ECU) is still functioning.
According to my notes, on 89 and newer cars with the 928.xxx.xxx alarm box, jumper 15 to 87a and the car will start and run.
__________________
Good luck, George Beuselinck
Last edited by 944 Ecology; 03-09-2013 at 09:33 AM..
|