Quote:
Originally Posted by saxen
thanks Geneman,
I followed that buiild and craigs as well, the major differance was the front strut housings, both threads had them raised 30mm from elephant, im still running stock height on mine.
craig, my rear was lifted about 2 inches to high before (after taking 3-400 lbs off the car. just for a startign point do you remember what degree you set your rears?
|
I had the same thing happen a few years ago when I took out my AC, cruise control and backdated the heat!
My previous angle was around 17 degrees. It measured 20, but the car was around 3 degrees down angled on the stands. I'm at 15 degrees now, and a little lower then before the suspension upgrade, so somewhere between 15 and 17 degrees on your springplates should be "in range".