|
radiator
hey guys i live in CA and i had the same problems
now i use a triple pass radiator i made by just cutting two slices in my radiator tanks evenly spaced and placing thin plates in the cuts sealing with aluminum radiator repair kit. takes 1 hour or less and 2-2500cfm fans sucking air from bottom.
i run a 355 with 360 hp 400 fpt and 175 thermostat and it never over heats, in fact the faster i go the cooler it gets.....on a hot day 95+ at idle for 20 min it gets to 182
before i put the thermostat in it would not even get warm, also make sure all bends are not being sucked closed by water pump by placing hose clamps on the part of hose. i guarantee it will make a big difference i almost gave up until i discovered this cure my self. i drive this car every day no problems would take it anywhere.
|