Quote:
Originally Posted by jeffreyallen
Hi Bill,
I have a '92 964 C2 that had original shocks and springs. I wanted to lower the car (and improve handling) so I had my local shop install ROW M030 springs with Bilstein HDs. Was aligned and corner balanced etc. Problem is that I don't think the car is even 1/8 inch lower. Was expecting 3/4 inch to 1 inch based on online posts. Is there any way to adjust the ride height? Can the shocks be installed in a way to compress the springs more, or did I just get the wrong springs for lowering?
Many thanks for any advice you have.
Jeff
|
W/ the exception of RS, none of the 964/993 factory suspensions are designed w/ lowering in mind.
here is a front and rear 993 M030 shock spring set.
The front gas a very short set of threads that can be used for corner balancing, the rear uses different thickness shims to adjust height a small amount.