|
I don't have a radio in my car, but the DIN radio cutout will fit 3 VDO gauges. remove the lower dash, cut a piece of sheet metal to size (you will need to rasp out the upper right corner where the glove box lock is) place the metal in place and from the back of the dash trace the outline of the DIN cutout on your sheet metal. remove your sheet metal and mark your spots for the guages. I was lucky and got sheet metal just thick enough to match up with the rest of the dash - so when it is covered in vinyl (mine is just painted now) it will look seamless. Not as easy to see as John Rogers setup, but looks a little cleaner, I can take digital picks if you want.
|