Quote:
Originally Posted by E Sully
The number 2 pin on the Carrera engine harness is not used in the conversion.
All the connections I highlighted with the tinted rectangles are not needed.
|
Thank you very much Ed!
Also, for the benefit of anyone looking at this thread in the future, I found the part number for the M18xM10 adapter for the sending unit; PN 901.101.175.01.
This thread has some good info on this topic:
http://forums.pelicanparts.com/porsche-911-technical-forum/247251-3-2-swap-oil-pressure-sender.html
Roger