|
I would expect 280-290. Not quite comparable but my 3.0 Liter engine makes 260 in this trim:
930/Carrera engine block
95 mm cylinders
JE pistons 10.5 comp. Adjusted to 10.2
Carillo rods
3.0 Euro Carrera/2.4/2.7 crank
Carrera 3.2 heads with new valves and guides. The heads were fitted with a special flange and drilled to accept the MFI injectors.
GE 60 cams
MFI setup with throttle boddies and stacks from a 2.2 S
KN aircleaners
Dansk Stainless steel heat exchangers
Stainless steel 2 in 1 out muffler.
I have now replaced the heat exchangers with a set of 40 mm headers. I am also going for a pair of 42 mm throttle bodies, as the ones from the 2.2 are way too small for the Carrera 3.2 heads. That should add a bit of HP...
/Christian
__________________
Christian
1972 911 S - 3.0 MFI in the making of an ST:
http://forums.pelicanparts.com/porsche-911-technical-forum/733424-another-st-build-time-denmark.html
|