View Single Post
Mrmerlin Mrmerlin is offline
Petie3rd
 
Mrmerlin's Avatar
 
Join Date: Jul 2000
Location: Philly PA
Posts: 4,528
Send a message via Yahoo to Mrmerlin
stop touching the defrost switch, its going to cause the relay stick and then you wont be able to shut off the car,
you never use this part so leave it alone.
Read the owners manual to learn how the Defrost switch works,
BUT leave it alone


Before we go much firsther I request thet you prrroof red your wurdz,

It just makes it that much more difficult to understand what the issue you have are, and figure out a way to fix it.

To reset the Ox2 light find the small white box with the cables going to it, either near the CE panel or alongside the passenger seat under the cover.

On one side of this box there is a round standoff press the black part inside the standoff and you should hear a click this will reset the OX2 box

The I light comes on when the car is first started due to the E brake being on and
also the brake light check to be checked by pressing the brake pedal, once the pedal is pressed the brake light warning goes out. after the engine is running.

If the I light stays on then you need to check the warning lights to see what light may not be turning on when you first turn the key to run position,
use the owners manual to find the warning lights.

Other spurious causes are
the washer fluid tank being low,
the coolant sensor failed
or low oil level,
these can turn on the light but you may not see the dash warning if the light has failed in the warning area of the dash
__________________
^^^ Stan ^^^ 2019 BMW K1250 GS 2016 HD RK
1988 S4 Auto , Elfenbein Perlglanz, Pearl Gray
1982 5sp Met black and tan sport seats

Last edited by Mrmerlin; 05-09-2013 at 02:43 PM..
Old 05-09-2013, 02:35 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #7 (permalink)