Hello,
I purchased a rebuilt pedal cluster from Bruce Stone here on Pelican. I've about got the old pedal cluster removed and am stuck on one last piece.
In the picture below, i removed the little hair pin connector and slid the clutch cable off the knob. I thought that was all the disconnecting I had to do with the clutch cable but I can't pull the cluster out. It appears the clutch cable is still stuck/connected to the arm in the red square of the image below. Do I need to disconnect that? How do I remove that without breaking it?
I've got the firewall and underbelly nuts removed, along with having disconnected the brass arm that goes into the trunk compartment.
