|
Check all the nuts and I pry gently *GENTLY* above the port where the meat is thickest to separate. Constant pressure and wiggle, they pop apart.
Should be able to do the deck height with the cam tower attached though, yes? Shouldn't be a problem to only have one or two of the cylinders in place even if you install the piston/cylinders without clipping the piston in at both ends.
__________________
“Of the value traps, the most widespread and pernicious is value rigidity. This is an inability to revalue what one sees because of commitment to previous values. In motorcycle maintenance, you MUST rediscover what you do as you go. Rigid values makes this impossible.”
― Robert M. Pirsig, Zen and the Art of Motorcycle Maintenance: An Inquiry Into Values
Last edited by Lapkritis; 05-14-2013 at 08:57 PM..
|