On photo 3 there is no mention that the caliper would have to be removed to remove the pads. I had to remove the caliper so I could take the pad out. No matter how I tried pushing back the pads, There was not enough room to remove them because of the anti squeal shim on the rear of the old pads. If no anti squeal shim was ever replaced with the pad, then the caliper can stay where it is. I think that should be at least mentioned to DIY men. The caliper can be held up out of the way with a metal coat hanger or string.
__________________
This post was auto-generated based upon a question asked on our tech article page here:
Pelican Porsche Tech Article - Replacing Porsche 911 Carrera Brake Pads - Porsche 996 Carrera (1998-2005), Porsche 997 Carrera (2005-2008)