Quote:
Originally Posted by Flat6pac
78/79 used the pressed in pilot bearing. The answer is in the crank behind the flywheel. The 80 and later used the 3 6mm allen head bolts to hold the pilot bearing.
Someone swapped out the crank would be most likely answer if you have the 3 hole for the pilot bearing.
|
Not to hijack the thread, but assuming we take turbo vs. non-turbo out of the equation, should the different years SC flywheels be interchangeable assuming you can just unbolt the newer style pilot bearing (well, I guess that would make the old style forward compatible, but you couldn't go the reverse)?
Todd