Quote:
Originally Posted by Craig T
Even a "real" carbon fiber hood has the same issue. I used a real CF hood with extra reinforcement to avoid hood pins. It's much stronger than a typical fiberglass one, but not that light. Plus, only a few months past the painting it already shows the weave across the surface.
|
Real CF with polyester resin, or Epoxy?
I suspect FG or CF makes no difference if polyester is being used. It's the polyester that is shrinking causing issues.
__________________
The '66 912 Bastardization project has begun.
Note to PO's: LAY OFF THE FREAKING BONDO!!!!
The science was settled: Earth was flat.
Galileo : Flat Earth denier.
