Quote:
Originally Posted by Yan2947
Mitch, which water pump adapter did you use? It looks like one that allows you to place your water pump on either side of the motor? Your install looks very clean and incredibly well done! We need some more photos?
Yan
|
I'm not sure I'm answering your question, I'm using the Renegade Meziere Electric water pump. It's mounted low the the radiator pipe system pulling the cool water from the left side radiator on my wide body car (I believe the narrow body cars have the cool water radiator outlet on the bottom of the passenger side). However in my case w/o any previous information I mounted the pump to accommodate the rigid custom water piping and the stock Porsche hoses that feeds the 2 radiators. Because of that I have the inlet and the outlet at the same level. I talked to the Meziere factory and they said under optimum conditions that the inlet should be higher than the outlet. The tech thought I would be OK, we'll see... I have also added a 3rd custom radiator which is larger than the Porsche transmission oil cooler.
Here's the custom "Y" fitting that ties the 3rd radiator into the water system. This is the left side.
Here's the heater core return line.
