No thread but Chris at Turbokraft said it was an one off and NOT something they will recommend performance vise as its so thin to fit under the plain lid. But its fine for me and if I see performance loss I will connect again my water meth. I just tried 1 to 1.1bar and all went well and logs were a bit on the rich side so I will iterate until its fine in all gears and rpms.
The last change I made dipped the torque peak area under 11AFR to 10.3AFR so its a bit harsh adjustment but I hope to get a good compromise.
Here is the pic from the last owner.
__________________
************************************************** *******************************
10/78 930: HX40Super, MS3pro+IDX1050+044+E85, ITB, 12 Denso COPs, TrueSplit-BB/2*38WGs, Weight<1100kg
|