|
Registered
Join Date: Apr 2004
Location: Northern Arkansas
Posts: 4,482
|
" knew how to do it all but the wheel spokes"
Mine is an early '10, didn't come with alloy rims but the PO bought three and threw them in.
You don't need a spoke wrench, just a 10mm socket and an inch-pound torque wrench. Think they take 42 in/lbs, but done in three stages. The spoke nuts are accessible with the tire off.
The first one took a while but by the third I was getting faster.
Jim
__________________
down to jap bikes that run and a dead Norton
|