|
Registered
Join Date: Oct 2003
Location: Mount Pleasant, South Carolina
Posts: 14,811
|
I used an in/lb torque wrench on my BBS wheels. More accurate, but I can't remember the specs.
Do the fasteners you want have the correct length smooth shaft? Are nylocks typical?
My wheels used a rubber gasket on an aluminum ring, but I ran a bead of high temp RTV on the inside for insurance.
I'm just leary in not using good hardware on my wheels.
Last edited by A930Rocket; 12-18-2013 at 06:29 PM..
|