Lot's of thread son leak down tests, but none answer this question.
If I start @ TDC firing stroke for #1, are any other cylinders also @ TDC firing?
If so, which ones?
Real question = What is the most efficient way to test all cylinders with minimal crank rotation?
I'm thinking this is the "best" way???
so if firing order = 1-6-2-4-3-5......
- find TDC firing #1 and test
- rotate 120 degrees to #6 and test
- rotate 120 degrees to #2 and test
- ..... through to # 5?
I guess I'm asking if;
more than one cylinder can be tested without rotation
or
does every 120 degrees rotation after #1 TDC = TDC firing on the "next" cylinder.
Thank you
Craig