|
that's one of the tools you would need to do the tight areas .
also a air scrapper and air scaler for the stick on sound matting material .
a good air scrapper will come with 4 to 5 blades 3" , 2", 1" and most with one or two angle blades .
as for tekneek that's ez to master and you should get the hang of it in no time .
keep the blades sharp and watch the edges so you don't scratch up the sheet metal .
once you get the hang of it you will be able to start at one end of the chassis and in one pass go right to the other end with out stopping .
|