|
Some of them are a real sob to get out of the knuckle. Can you try to partially thread the bolts in from the back of the hub, and try to knock it out by smacking on the bolt heads? Just be warned that you may ruin the bolts from hitting them.
You can also try to get a chisel in between housing the bearing and the knuckle, and use your bfg and man hands to whack the piss out of it. Soak it with some pb, and them come back and pound on it some more.
You could also try to thread some bolts in from the front side, to try to make a little more leverage on it, then beat it from side to side, you WILL ruin the bolts doing it this way, so get some spares.
Once you get it to move, an air chisel is your best friend. Good luck. !
__________________
No left turn un stoned
|