Quote:
Originally Posted by benzboy
im sure I put the distributor back in on tdc of cylinder 1. but to check. if I pull valve cover off when at tdc on 1, the rockerers should be able to move just a little bit, right? im sure all wires are connected properly.
|
w/ an E there is a certain amount of overlap at tdc where both valves are still slightly open, therefore no wiggle, but both should be very close to closed w/ #1 cyl at tdc
if you are backfiring through the intakes there is a timing issue
it could be
ign timing
cam timing
mfi timing
firing order error
double check everything