Quote:
Originally Posted by 1QuickS
Check tips of idle jets for dirt, tip diameter is 0.475mm.
Mixture screws should be about 3 1/4 turns open to begin with tuning.
Spitting up is a lean condition so check for air leaks from your hoses attached to the bottom flanges of the carburetors and all other air hoses attached to your carburetors.
|
Thanked. Realmetne grateful buestra good arrangements to help.
3 1/4 turns out? and adjust the mixture screew mescla fattening?
is the initial posision idle stop screw? the screw that regulates the opening of the throttle valves?