|
Under the radar
Join Date: May 2007
Location: Fortuna, CA. On the Lost Coast near the Emerald Triangle
Posts: 7,135
|
The problem with 911s is they tend to rust from the inside out, as some of us have discovered in the past.
The only way to have an honest evaluation of the work ahead of you is to completely disassemble the car. Only then can you tell what, if anything, is repairable.
You should spend some time, if you haven't already, on this forum searching for others who have repaired rusty cars.
Yes, repair panels are available, but once the rust gets into the frame and inner panels it can be a nightmare.
Good luck and keep us posted.
__________________
Gordon
___________________________________
'71 911 Coupe 3,0L outlawed
#56 PCA Redwood Region, GGR, NASA, Speed SF
Trackrash's Garage :: My Garage
|