|
I just checked the impedance and found 966 on the pins for the reference sensor, but no reading for the engine speed sensor pins. I then checked the voltage on the two sets of pins and got nothing on either set.
Given the comment by someone from another thread on the speed sensor sending a signal to the fuel pump to continue after cranking is stopped, and since I smelled fuel pretty strong after cranking to check voltage, I let the car sit a while and tried again. Still does not hit.
After all the other checks, it seems the problem is one or both sensors. Just wanted to see if that sounds right. Any input at this point would be appreciated.
Thanks again for all the tips.
Sid
|