[steely]

I removed the motor from the regulator frame while it was in the door - had to have the window propped up with wood or tape - this was from some of my notes. I am certain I did it reverse order when it went back in.
edit:
these are my notes for replacement - my removal notes are much more detailed. Note: I had the entire window out:
Remove old felt from Front track
Install latch – reconnect cable and rod into plastic cups
Emplace regulator
Install new squeegee
Emplace main window
Install motor
Replace felt in Front track
Install Front track / with new bracket
Install rear track
Install regulator
Install trim
Clean/Repair/replace door shell moisture barrier
Switch wiring
Clean/install Panel
Clean/repair/install Door pocket
Repair crack / Install Cap