I am considering leaving out this valve when I re-install the upper manifold. From my research it seems there are two ways to go about this. Can you folks please check my logic.
Option 1
Remove the valve completely and cap off all vacuum ports associated with it. Two on the upper manifold and one on the throttle body.
Option 2
Leave everything in place with the exception the center hose on the backside, ala JFairman I believe.
Option 3
There seems to be some chatter about reversing it and venting to atmosphere?
Pros to removal
1. simplicity - getting to the hose clamp on the backside was a pain
Con to removal
1. No boost hold between shifts
Personally the added noise theater isnt a concern of mine. Will any post change adjustments need to be made, idle setting etc?
Thanks for the help folks, sorry for all the noob posts.
http://forums.pelicanparts.com/911-930-turbo-super-charging-forum/519065-decel-valve-delete-idle.html