Did what you said Stan, thank you.
Replaced relays and fuel pump fuse.
Fuse was not as tight as i feel it should have been.
Put a new fuse in, it felt loose also.
Pulled the fuse and took a spring loaded center punch and punched
two little bumps on each blade.(let me know if this is no good)
That snugged it up nicely.
It starts, and stays running.
Idle still fluctuates, ISV on the way.
Hoping this took care of it.
CE panel R/R in my near future.
Stepson, all ground points were cleaned last fall.
Will definitely check them though, thanks.
