Hello everyone,
Hope this helps, I am the PO of this engine and it is as Colorado968 says a great engine. Very strong and super reliable.
The camshaft rockers were also re-surfaced by Elgin when the cams were profiled as well as upgraded camshaft seals. The heads were done by CAM with as he says all new valves and seals. I also added pressure feed chain tensioners and all new chain ramps and guides.
The top end was assembled by one of our decades long local members who has built Club race winning engines for as long as I can remember.
I have the cam timing specs for the 964 cams as it was set during the rebuild if the new owner wants them.
Colorado968 I hope this helps and that I didn't over step my PO boundaries ...
