|
Fleabit peanut monkey
Join Date: Nov 2007
Location: North Canton, Ohio
Posts: 20,836
|
13 MM. Saying this because they are mostly 10mm and 13mm. On all cars, pretty much.
Get a skinny set of metric wrenches. Skinny meaning wall thickness on the box part of the wrench. The big fat gear wrenches from Harbor Freight have too much thickness (probably) to allow the wrench to slide over the nut.
Check at your local auto parts store. I am thinking $30+ for a decent set. They will set you free.
Edit: Square head is meant to hold the bolt in place while you loosen the nut. It's all good. Just a little learning curve and a few $$ spent to get a few tools.
__________________
1981 911SC Targa
Last edited by Bob Kontak; 03-16-2014 at 05:16 PM..
|