|
Back from Beyond
Join Date: Nov 2004
Location: Alberta, Canada
Posts: 2,697
|
Thanks again, all. After taking into consideration all your replies I believe my course of action will be to determine if they are in fact warped. Perhaps they're not. I'm going to deglaze them if I get time this weekend and see what results I get. From what I've read, a good sanding with 120, from edge to centre, should remove pad material. I'll do the pads as well.
FYI, when I rebuilt the front calipers I ensured I had the right 20-degree piston offset.
Cheers, gents!
|