[FLYONWALL9]

I wasn't quite sure which forum to post this in so I thought I would
try this one first. I have been trying to get in touch with BoxerGT in
order to get some fuel lines made up and haven't heard back from him.
I hope he is okay?

Anyway, does anyone else make fuel lines on the board? I don't really
care to use the factory ends. It appears that is where mine are leaking
anyway. Would just like some with straight ends vs having to worry
with someone getting the clocking of the bends correct. The one that
is truly leaking on mine currently is the one that is just under and to
the right of the throttle body. I know I should have replaced these
when I was doing my oil seals and such this past winter but budget
had me in a bind. Now I must.

Also, does anyone have any tips on the easiest way to go about it
while the engine is still in the car? I'm sure taking out the air filter
box is a must and will make it easier. But, what else?

Lastly, does anyone have a photo of the FPR that is on the passenger
side of the engine and what that vacuum line should connect to? I am
thinking I have it connected to the wrong place and that could be
giving me too much fuel? I did replace the oil soaked lines while the
engine was out.

Thanks in advance for your help and replies,
Scott