|
Randy,
It looks like you have 3/8 overlay plate (4 mm). 0 mm is 3/4 overlay with the same hinge. If you want the doors to meet up in the middle with a 1/8" gap, those aren't the plates. How wide are the stiles or face frame on that cabinet? It looks like 1 1/2"? Single door for the sink? Measure the interior opening and add 3/4" to the door. So you want the door to meet up with the drawer fronts? If not, keep thing 3/8" overlay all the way around and you should be fine. Drawer fronts will follow and cut to exactly the same width as doors down below. I have not use Mepla product in over 20 years but they all work the same way with very similar set backs. Try and give it a go with a sample. The cup or the 35 mm hole should be about 3mm from the edge of the door. Those are the correct hinges plate for face frame installation.
|