Quote:
Originally Posted by Flat6pac
I put an ice pick behind it but on #1 you need to be removing the circling from the #2side because the circling is shallower in the piston.
Why you want to put yourself through the agony of keeping them together while you're doing all the work......
Bruce
|
Bruce,
Thanks for the reply, I just called the wife to pick one up from the hardware store, you saved me a long trip to town..
About keeping the pistons and sleeves together, I was following a recommendation for keeping KS units together, and so focused on the idea, I did not imagine that I may have MAHLE.. I do.. I just slid one off and MAHLE 95ZN1 printed on # 1 Happy day! I lucked out...
Thanks again!!