|
Thanks for the tips. There was a loose wire at the switch. The brake lights are working. One small notation, my 6 has dual filament brake lights. I did find one bulb that had an issue with 1 filament. Tiny break in it.
Now to start a new thread for the turn signal/driving light. Which the turn signal works but the driving light won't come on. It isn't the bulbs. I measured the voltage at the plug and it doesn't seem to be getting power. When I pulled of the cover, there are 3 wires in it. One is brown(ground), one is black(connected) and one is white (which isn't connected). I don't see anything to connect the white wire on the bulb plate. Any ideas before I tear apart the other side to see what's going in correctly on that side?
|