|
Under the radar
Join Date: May 2007
Location: Fortuna, CA. On the Lost Coast near the Emerald Triangle
Posts: 7,129
|
I had the same problem. Since the torsion arm is stuck to the torsion bar, I pried the torsion arm away from the torsion tube. That got the torsion bar loose in the torsion tube. I then removed the cap in the torsion arm, like described above. I put some blocks between the torsion arm and torsion tube and pounded on the end of the torsion bar to loosen it from the torsion arm. Good luck.
__________________
Gordon
___________________________________
'71 911 Coupe 3,0L outlawed
#56 PCA Redwood Region, GGR, NASA, Speed SF
Trackrash's Garage :: My Garage
|