If you look carefully at the male pins you can see they are split down the center twice. You can push a razor blade down them to spread them out a bit for a tighter fit in the female receptacle.
Clean off the pins and clean out the female receptacle with some vinegar and rinse with water.
Then put a little battery post protectant on the male pins. (very thin film)
Everything works better when it's tighter and lubed after a vinegar and water douche! 
__________________
Dennis
Euro 1978 SC Targa, SSI's, Dansk 2/1, PMO ITBs, Electric A/C
Need a New Wiring Harness? PM or e-mail me. Search for "harnesses" in the classifieds.
|