[Orange911S]

OK. I am still puzzled. I took the ground from the MSD off of the chassis bolt and moved it to the an housing. I upgraded the connector to one that was thicker and would put more surface area under the washer and bolt.

I started it up and got the same behavior as before. It started with a little hesitation then ran and when I hit the gas it went to 5000 and then died.

Next stop is power. I am connected to the starter, and have a couple of connectors in the line so that may be the issue.

I have read about many connections to the rear fuse box and would like to understand the pros and cons.

No more wrenching tonight, but will be searching the forums for more clues.