Quote:
Originally Posted by boyt911sc
Dick,
Could you show similar demo for a 6-pin CDI? My interest and curiosity is in 6-pin CDI diagnostic test. Thanks.
Tony
|
I don't have a 6 pin around right now, but the connections are similar
With the CDI on its back on the bench, left to right:
1.brown & brown/white (Coil - and ground), 2. purple/black (tach), 3. black (green wire coax shield in heat shrink)
Bottom row Left to right:
1. White to coil +, 2. Red (power from white T connector), 3. Green (green wire coax core)
so the bottom row on the 6 pin is the same as the demo.
Only difference is the BROWN & BROWN/WHITE is ground. In my demo it is clipped to the case lug. For the 6 pin you would connect ground at the upper left connector.