|
Heat guns at Harbor Freight run from $12.99 to $39.00, cheap and a worthwhile investment.
I suffered no cracking. The trick is to hold the gun at a distance of 4-6 inches, wave back and forth over the area about to be worked, until the metal/paint is hot enough to make you pull your finger back from the touch.
Do this over a 3"-4" area. When warm enough, quickly but gently roll the same 3-4 inch area. I used a 'C' clamp to hold the gun over the area I was working, to keep a steady flow of warm air.
__________________
STONE
'88 Cabriolet, using EP Slick 20w50 partial synthetic Snake Oil...just as Rommel intended. 
Deny Everything; Admit Nothing; and Always Make Counter-accusations 
|