Quote:
Originally Posted by 962porsche
things like this you would take it apart .
then go over to the blasting cabinet with all the rusted parts that need to get blasted clean .
after blasting the parts that need to be the semi gloss black get painted with SEM rust shield .
8 parts of flat black to 1 part of there hardener will match the OE look of the part .
you can spray it from a preval sprayer . they are dirt cheap at a home store .
with hardener you will get more then twice the life out of a coating over any spray can product .
|
962porsche: You mean I should take to a sand/bead blasting shop to get the rust removed I presume. As far as painting steps want to make sure I got your instructions right.
First pain with SEM rust shield (off the shelf product readily available?). Next mix up hardner (where do I get this, and the paint) and paint in proportions noted. Put it in a sprayer and paint. Is that about right? What kind of sprayer would you recommend? Sorry for all the 20 questions, but as I said this is new to me, and don't want to be a DIY screw up.
Thank you for your response appreciate your help.