|
on the 928 the clutch pedal being pushed down will be pulling the crankshaft to the rear of the car.
This will have no effect on the motor mounts.
The throwout bearing spins all of the time that the engine is turning .
This could have an effect on the pressure plate fingers as it could act as a sawing motion if the bearing is seizing
from your description the fingers on the PP may have had a few break off,
also check the guide tube for loose bolts,
and the release arm bushing it may be crumbling.
__________________
^^^ Stan ^^^ 2019 BMW K1250 GS 2016 HD RK
1988 S4 Auto , Elfenbein Perlglanz, Pearl Gray
1982 5sp Met black and tan sport seats
|