|
Thanks for the encouragement DSPTurtle, like I said for a 1st timer, it's a little overwhelming. I did find a shop in my area that has the type of cleaning equipment and solution that I have been looking for. Gunther's Machine & Speed Shop in Walkersville MD is cleaning them for me. I'm particularly interested in the cam towers as I spent the most time. He did tell me that he wasn't sure how much cleaner they would get since they were already fairly clean. I can't wait to see them. I did decide to send the rockers in for polishing. I figure if I've gone this far I should skimp on something like this. And yes I did think, if I'm replacing the cam why am I worried about making sure they go back in the same spot, but what do I know.
jager911, the cam I'm installing is a stock 964 cam. I wanted to stay mild as my plan was to not replace the pistons and I was concerned about having valve clearance issues. A stock profile allowed me to not have to worry about those issues. I did tell the machinist what I was doing so he knew what my goals were and would know what to do to match everything up.
__________________
Mike
'89 CARRERA
#402
|