[jhstealth]

Hey guys I've been closely reading all of your threads for your conversions and have picked up a lot of great info. I have a few questions on mine that I have an idea but want to make sure before I start and do it wrong.

1 could someone weigh in on basically how the coolant system is run in the back. I have the electric water pump in line thermostat and the distribution block and expansion. I have the coolant lines ran through the heat exchangers already. From what I gathered from the explained inlets and outlets the pump goes in line from rad to the motor. I know how the coolant flows in the bottom holes and out the top. It's mostly the distribution and expansion take that I'm not 100% on.

2 does anyone have a list of what needs to be wired in he wire harness. The manifold is reversed and I want to make a list of what I need to wire. I'm probably going to locate the ecu in the motor bay so no need for expansion.

Thanks a lot for any help!