[targa80]

Do you have a complete copy of the schematics? You will really need it if you plan to correct the issues with the wiring. They are available from our host under the Parts Catalog window on the left side bar or from the Haynes manual or other tech manuals available. The Heater blower switches are ganged together in parallel near the hand brake each have a yellow wire going to them (this is if you have the two heater lever configuration). The handbrake switch has a brown/yellow stripe wire connected to it's switch. I used the 1982 schematics to ring out all of my wiring on my 1980SC. I found it easier to use than the 1979 SC schematic. The 79SC schematic uses a two separate legends with current track identifiers where as the 82SC schematic has parts identifiers on each part on the schematic. In my case the 82SC schematic was correct for my application. Naturally, I did find where wires were no longer used and I just annotated them on my schematic.